10 Common Electrical Problem: Your office has a lot of common electrical materials and is a place where numerous people sit and do their work. This means that their safety and well-being are in your hands. As you are the business owner and they work for you. When it comes to safety, simply implementing CCTV cameras and fire alarms doesn’t cut it. In fact, there is something even more dangerous that can put the lives of your employees at risk.
It is highly crucial to get your wiring and electrical system properly inspected. Electrical hazards make up for a large portion of workplace accidents. They can occur due to exposed wiring, short circuits, excessive load, and many other reasons. Therefore, you can never be too safe when it comes to electrical issues.
Even if you think your electrical system is safe and foolproof. You should always look out for these common electrical materials problem in your office.
Outdated or Damaged Equipment
However, not every office has a maintenance schedule that calls for the timely inspection of all the equipment. As a result, the employees keep using them until they die down with a loud bang or spark.
To prevent this from happening and from causing any further damage to your appliances or wiring. Make sure to get your wiring, cables, and cords checked.
If you notice any damage or see that there is a spark or any other fault. Then you should get your equipment and appliances checked at the earliest.
Improper Grounding
Grounding, or earthing, refers to the process of connecting your home’s electrical materials system with the earth’s conductive surface. It is extremely important to redirect excess current from the electrical materials system.
If there is no or improper grounding, there is a higher risk of electrical accidents, including electrocution.
Therefore, it is highly essential that you get the grounding checked by a competent and experienced electrician. Who not only identifies any faults in your electrical materials system but also gets them fixed.
Overloaded Circuits
Your office has people present in it. So it is necessary for a large number of power outlets for their devices.
However, there may not be enough power sockets to cover the entire office. This may force employees to plug in multiple devices and appliances into extension cords and cause the circuit to overload. This can result in an electrical fire or burn of the wiring as well.
Firstly, you should ensure that there are a sufficient number of wall sockets spread evenly throughout the office. So extension cords aren’t needed at all. Secondly, even if you need extension cords. Make sure you get one with surge protection and an integrated on/off switch. So there is no chance of a short circuit or circuit overload.
Poor Insulation
Electrical problems that you might experience in office involves poor insulation of the wiring and cables in the electrical system.
The only way to prevent this is to call an electrician and get your wiring inspected. So that there is no uninsulated wiring left that can be fatal for you or your employees.
Incorrect Wire Sizes
Did you know there is also such a thing as wire sizes? they determine how much load the wire can bear before it starts to overheat or its insulation melts off. It is okay if you don’t know anything about the right wire sizing. But it is imperative that the electrical companies around you know about this.
Ensure that the wiring inside your office doesn’t overheat and cause a disaster. You need to hire an electrician and have them check the wiring properly. So that your mind is at peace and your employees are safe as well.
Exposed Wiring or Components
Even if you have an ad hoc or temporary office, or your office is being renovated while the employees are working, the chances are that there will be exposed wiring or electrical materials components, such as lighting, open electrical panels, extension wires, power units, etc. These are only a few of the exposed electrical components that come to mind, but there can be a lot more of them, and they can cause electrocution and burns to your employees.
Even if your office isn’t undergoing renovation or repairs, there may be an area in which there is exposed wiring or components. You need to get in touch with one of the . They will also be able to tell you the proper wire sizing based on the maximum load you can put on the electrical materials circuit.
Unsuitable Environment
Every office doesn’t have the same environment, and this can be due to a number of factors. Primarily, the environment in your office may cause a higher risk of electrical hazards, i.e., excess moisture, and dust. If you don’t maintain cleanliness or suitable operating conditions. Your workers or employees will be at a greater risk of getting injured due to electrical hazards.
Overheating Fixtures and Appliances
A lot of offices have different shifts for their employees. This means that the lighting, appliances, and common electricals equipment are always running and get no rest at all. While this may be alright if you have new appliances. It can be hazardous if your appliances and fixtures have worn out with excessive usage.
Most offices also have halogen lamps or other types of lighting that produce a lot of heat. If you leave these lights on round-the-clock, it will cause the lamps to overheat, and this can be incredibly dangerous. Therefore, you should consider replacing your lighting with LED bulbs, as they are more energy-efficient and produce less heat. Also, make sure that the electrical wiring for all the appliances and fixtures is concealed and insulated correctly.
Health and Safety Risks
You may have employees with health conditions that require them to wear a medical device on their person at all times. First of all, a pacemaker can malfunction if exposed to electromagnetic waves. Therefore, you should hire an electrician to identify any electromagnetic radiation present nearby.
If a medical device is plugged in, a short circuit can cause the device to malfunction. Therefore, it is up to you to eliminate any risk or threat to their health and safety. In most states, you may also be legally bound to do so.
Old Wiring
It is essential to address the fact that the wiring inside your office or commercial building may be outdated. You may not know about it, especially if you have moved into the building or commercial property. Old wiring can be quite a nuisance and can cause a lot of problems in the office. It is unable to transmit the same amount of current required to power up devices and appliances. Which can cause those appliances to burn out and get damaged.
Moreover, old wiring also has poor insulation, and as you already know, it can cause electrocution or an electrical fire. Old wiring isn’t compatible with newer appliances, so it is inevitable for you to get them changed. Otherwise, you will be up against electrical hazards, tripping breakers, and a threat to your employees’ safety.
If you’re in a new office that hasn’t done any common electricals inspection since the past few years. Electrician near me’ should be the next thing on your Google search. There are several electrical companies that you can hire to check your office’s electrical system. Doing so will ensure a safe and comfortable work environment for your employees.
Source:
https://www.katoelectrical.com/blog-1/electrical-problems-in-the-office